0.85inch LCD Display Module 128×128 Resolution IPS Screen for Raspberry Pi/ STM32/ ESP32/ RP2040/ Jetson Series 65K RGB Colors Embedded GC9107 Driver Using SPI Bus

- 0.85inch LCD Display Module IPS Panel, 128×128 resolution, 65K RGB colors, clear and colorful displaying effect - Embedded GC9107 Driver, Using SPI Bus. This LCD uses a four-wire SPI communication interface, which can greatly save the GPIO port, and the communication speed will be faster - SPI interface, minimizes required IO pins, controlled via SPI Bus, supports controller boards like Raspberry Pi/Arduino/STM32/ESP32/RP2040/Jetson series - Operating voltage: 3.3V (Please ensure that the supply voltage and logic voltage are consistent; otherwise, it may result in the device not functioning properly) - The LCD supports 8-bit, 9-bit, and 16-bit input color formats per pixel, namely RGB444 and RGB565, two color formats, this screen uses RGB565 format color format, which is also commonly used RGB Format